ALL Magnetics Inc,. --ABOUT US

Device Magnets Category

Magnetic Assemblies Magnets

Bi-Polar Assemblies

Bi-polar assemblies can be used for holding and transferring parts, or for aligning pieces during welding operations, and as the holding elements on paint racks. All-welded construction with a stainless-steel cover. No epoxy. Withstands considerable abuse and temperatures up to 500°F.

Magnetic Bi-Polar Assemblies Magnets

Part No.	Dimensions/Inches									Pounds	Price ($)
Part No.	A	B	C	D	E	F	G	H	I	Pull	Price ($)
1390A1	0.875	3.250	1.375	0.750	2.000	0.437	0.375	0.281	2.750	40	14.50
1390A2	1.250	3.250	1.375	1.000	2.000	0.625	0.750	0.281	2.750	55	17.50
1390A3	0.875	5.250	1.375	0.750	3.875	0.437	0.375	0.281	4.500	65	17.50
1390A4	1.250	5.250	1.375	1.000	3.875	0.625	0.750	0.281	4.500	120	25.50
1390A5	1.875	5.250	2.125	1.750	3.875	0.937	1.125	0.312	4.500	250	35.00

KEY: A = Width , B = Length, C = Height, D = Back plate width, E = Magnet length, F = Center to edge of magnet, G = Gap width, H = Hole size I = Center to center of hole

Alnico Assemblies

Alnico assemblies are most useful where heat is a factor. They withstand temperatures of 850°F without appreciable loss of power. They should e insulated with a non-ferrous sleeve such as aluminum or brass when pressed into steel. listed below are the most common sizes-other sizes available. Most available with or without tapped hole. Call for details.

Please E-mail Me

Part No.	Dimensions /Inches		Approx. Holding Value	Price ( $ )	Part No.	Dimensions /Inches		Approx. Holding Value	Price ( $ )
Part No.	DIA	THK	Approx. Holding Value	Price ( $ )	Part No.	DIA	THK	Approx. Holding Value	Price ( $ )
9800	0.250	0.500	4.00 oz.	5.10	9805	0.750	0.750	9.15 lb.	9.15
9800	0.250	0.750	6.00 oz.	5.10		0.750	1.000	9.45 lb.	10.80
9801	0.312	0.500	14.00 oz.	6.00		0.750	1.250	10.00 lb.	12.35
	0.312	0.750	18.00 oz.	6.00	9806	0.875	0.750	13.20 lb.	11.15
	0.312	1.000	20.00 oz.	6.00		0.875	1.000	16.50 lb.	12.90
9802	0.375	0.500	1.50 lb.	6.50		0.875	1.250	17.30 lb.	14.55
	0.375	0.750	1.50 lb.	6.50	9807	1.000	0.750	15.50 lb.	15.40
	0.375	1.000	1.75 lb.	6.50		1.000	1.000	17.00 lb.	13.05
9803	0.500	0.500	2.50 lb.	6.60		1.000	1.250	19.00 lb.	15.30
	0.500	0.750	3.00 lb.	7.30	9808	1.250	0.750	17.50 lb.	14.05
	0.500	1.000	3.50 lb.	7.85		1.250	1.000	21.00 lb.	17.65
9804	0.625	0.500	2.75 lb.	7.55		1.250	1.250	25.00 lb.	20.60
	0.625	0.750	4.25 lb.	8.50
	0.625	1.000	4.80 lb.	9.50

Ceramic Assemblies

Ceramic assemblies use a ferrite magnet encased in an aluminum cup. They should not be used in temperatures higher than 180°F because of the epoxy. They can be pressed into steel without any further insulation.

Part No.	Dimensions /Inches		Approx. Holding Value	Price ( $ )	Part No.	Dimension /Inches		Approx Holding Value	Price ( $ )
Part No.	DIA.	THK.	Approx. Holding Value	Price ( $ )	Part No.	DIA.	THK.	Approx Holding Value	Price ( $ )
8501	0.375	0.500	1.00	5.00	8505	0.750	0.500	5.00	6.05
	0.375	0.750	1.75	5.00		0.750	0.750	8.00	6.05
	0.375	1.000	2.25	5.00		0.750	1.000	9.50	6.05
8502	0.500	0.500	2.25	5.20		0.750	1.250	10.59	6.05
	0.500	0.750	3.00	5.20	8507	1.000	0.500	7.00	8.65
	0.500	1.000	3.75	5.20		1.000	0.750	9.00	8.65
8504	0.625	0.625	3.75	5.85		1.000	1.000	12.00	8.65
	0.625	0.750	4.00	5.85		1.000	1.250	16.00	8.65
	0.625	1.000	5.00	5.85	8509	1.250	0.750	13.00	9.45
						1.250	1.000	20.00	9.45
						1.250	1.250	24.00	9.45
						1.250	1.500	26.00	9.45

A-L-L Magnetics Inc.,

sales@allmagnetics.com

Tel: (714) 632-1754 Fax: (714) 632-1757

Or ORDER Toll-free at: 1-800-262-4638

2831 Via Martens

Anaheim , CA 92806

How to get to ALL Magnetics Inc.